Popcorn Machines
Popcorn Supplies
Cotton Candy Machines
Cotton Candy Supplies
Snow Cone Machines Canada
Snow Cone Supplies
Hot Dog Machines
Hot Dog Supplies
Candy Apple Supplies
Fryer Equipment and Funnel Cakes
Nacho Warmers and Supplies
Illuminated Concession Signs
Warmers and Merchandisers
Movie Posters
Movie Film Cells
Home Theater Decor
Home Theater Seating
Popcorn Machines
HTD Canada Popcorn Company your #1 source in Canada for Popcorn Machines, Popcorn Makers, Commercial Grade Popcorn Machines, Popcorn Poppers, Popcorn Equipment, Home Theater Popcorn Machines and Industrial Popcorn Equipment. Manufacturer of Centerstage Professional Concession Equipment. Lower Priced Popcorn Machines
There are many of low quality machines available today and always are cheaper than other leading Brands, but there are many reasons why. They are generally sold from scattered concession companies, ebay or Amazon and most are shipped from the USA but we are located in CANADA. Popcorn machines shipped from outside of Canada are subject to duties and taxes therefore they are not really as good a deal as they initially appear. Further please beware of dropshippers working from their homes or call centers, these are easy to spot because they do not provide an address or a phone numbers. Listed below are just some of their problems and why they are able to sell their machines cheaper
- Lower Wattage - Lots of wasted unpopped kernels and longer batch times
- Gear Driven Pots - Gears slip or never properly engage causing jams and burnt popcorn
- Pot Stirrer Motors - Plastic cogs and roof tracks which break or warp under the stress and heat.
- Use Rivets - They will often use rivets instead of screws, therefore making it impossible to remove parts to properly repair, clean or sanitize
- Lowest Grade Popcorn Pots - The pots will never have a proper interior non stick coatings with inferior fuses.
- Flaws In Painted Finishes - The finishing is always done poorly with many imperfections.
- Replacement Parts - Replacement parts are difficult if not impossible to get.
- High Failure Rates - Most of these types of machines have a 30-50% failure rate within the first 6 months without heavy use.
- Steel Components - Low grade with thinner steel components which includes screws
- Warranties - They can offer up to lifetime but this is only on the machine shell and none of the major parts like pots **Usually 30 Days
- Size - The overall size of these machines are always smaller.
Our Commercial grade poppers manufactured are Manufactured by HTD Canada, Benchmark USA & Paragon USA and Distributed in Canada By HTD Canada. That's right in Canada at a fraction of the High Retail prices. SHIPPED FROM CANADA IN CANADIAN DOLLARS, DUTY FREE, NO CUSTOM FEES OR BIG SHIPPING FEES.
- Higher Wattage - No wasted unpopped kernels and much shorter batch times. Which means our 4 oz commercial machines will make as much as a low grade 8 oz machine
- Direct Drive Pots - No gears, solid rod from a motor therefore no slip or jams
- We Use Screws - Therefore making it possible to remove parts to properly repair, clean or sanitize
- Highest Grade Popcorn Pots - The inner kettle is constructed of thick gauge hard-coat anodized aluminum for maximum performance and easy cleaning. Aluminum provides the best heat transfer of any cookware approved alloy while the 20 mil thick anodizing armors the kettle for durability and provides a super-slick surface for easy cleaning. The kettle jackets are made of Nickel Plated Steel for corrosion resistance and easy cleaning.
- Flawless Painted finishes - Superior finishing applied under strict conditions and quality control.
- Replacement Parts - Replacement parts are available in Canada.
- Low Failure Rates - Our machines have less than a 1% failure rate within the first 3 years with heavy use.
- Steel Components - Highest grade and thicker steel components which includes screws
- Warranties - 1 - 3 YEARS 100% ALL PARTS INCLUDING THE POT.
- Sze - The overall size of these machines is larger
Decide on Size and NeedA popcorn maker will complete your home theater, business or next school event. Commercial and home Popcorn makers come in all shapes and sizes, so before you deciding, please consider how much popcorn you will require and in what length of time. The list below will help you determine which size machine will be best suited. Check out HTD Canada`s large selection from HTD Canada's Centerstage Professional Series, Benchmark USA Inc. and Paragon USA.Theater-Style Popcorn
Lower Priced Popcorn Machines
There are many of low quality machines available today and always are cheaper than other leading Brands, but there are many reasons why. They are generally sold from scattered concession companies, ebay or Amazon and most are shipped from the USA but we are located in CANADA. Popcorn machines shipped from outside of Canada are subject to duties and taxes therefore they are not really as good a deal as they initially appear. Further please beware of dropshippers working from their homes or call centers, these are easy to spot because they do not provide an address or a phone numbers. Listed below are just some of their problems and why they are able to sell their machines cheaper
- Lower Wattage - Lots of wasted unpopped kernels and longer batch times
- Gear Driven Pots - Gears slip or never properly engage causing jams and burnt popcorn
- Pot Stirrer Motors - Plastic cogs and roof tracks which break or warp under the stress and heat.
- Use Rivets - They will often use rivets instead of screws, therefore making it impossible to remove parts to properly repair, clean or sanitize
- Lowest Grade Popcorn Pots - The pots will never have a proper interior non stick coatings with inferior fuses.
- Flaws In Painted Finishes - The finishing is always done poorly with many imperfections.
- Replacement Parts - Replacement parts are difficult if not impossible to get.
- High Failure Rates - Most of these types of machines have a 30-50% failure rate within the first 6 months without heavy use.
- Steel Components - Low grade with thinner steel components which includes screws
- Warranties - They can offer up to lifetime but this is only on the machine shell and none of the major parts like pots **Usually 30 Days
- Size - The overall size of these machines are always smaller.
Our Commercial grade poppers manufactured are Manufactured by HTD Canada, Benchmark USA & Paragon USA and Distributed in Canada By HTD Canada. That's right in Canada at a fraction of the High Retail prices. SHIPPED FROM CANADA IN CANADIAN DOLLARS, DUTY FREE, NO CUSTOM FEES OR BIG SHIPPING FEES.
- Higher Wattage - No wasted unpopped kernels and much shorter batch times. Which means our 4 oz commercial machines will make as much as a low grade 8 oz machine
- Direct Drive Pots - No gears, solid rod from a motor therefore no slip or jams
- We Use Screws - Therefore making it possible to remove parts to properly repair, clean or sanitize
- Highest Grade Popcorn Pots - The inner kettle is constructed of thick gauge hard-coat anodized aluminum for maximum performance and easy cleaning. Aluminum provides the best heat transfer of any cookware approved alloy while the 20 mil thick anodizing armors the kettle for durability and provides a super-slick surface for easy cleaning. The kettle jackets are made of Nickel Plated Steel for corrosion resistance and easy cleaning.
- Flawless Painted finishes - Superior finishing applied under strict conditions and quality control.
- Replacement Parts - Replacement parts are available in Canada.
- Low Failure Rates - Our machines have less than a 1% failure rate within the first 3 years with heavy use.
- Steel Components - Highest grade and thicker steel components which includes screws
- Warranties - 1 - 3 YEARS 100% ALL PARTS INCLUDING THE POT.
- Sze - The overall size of these machines is larger
Decide on Size and Need
These machines are the same style that are found in modern style movie theaters but they also require theater style popcorn blends. Our theater style popcorn can be found under our POPCORN SUPPLIES section on our website.
The formula for the size and output of a commercial machine are as follows
- 4 oz popcorn machine will produce approximately 90 small bags an hour
- 6 oz popcorn machine will produce approximately 120 small bags an hour
- 8 oz popcorn machine will produce approximately 160 small bags an hour
- 14 oz popcorn machine will produce approximately 260 small bags an hour
- 16 oz popcorn machine will produce approximately 300 small bags an hour
- 20 oz popcorn machine will produce approximately 400 small bags an hour
**SCHOOLS & BUSINESSES MUST PURCHASE COMMERCIAL GRADE POPCORN EQUIPMENT DUE TO CANADIAN HEALTH AND SAFETY STANDARDS
Copyright © 1998-2024 HTD Canada Popcorn Company
Now offering FREE SHIPPING on any THEATER POPCORN MAKER. *(some conditions may apply) ON ALL ORDERS OVER $199 (LIMITED TIME ONLY )
Showing 1 to 21 of 21 (1 Pages)